Lauryl Amine Oxide 30%
Foam • grease‑cut • bleach stable
Chemistry
Lauryl dimethyl amine oxide (LDAO)
CAS (ref.)
1643‑20‑5
Ionic type
Amphoteric
Active matter
≈ 30%
pH (as supplied)
~6.0–8.5
Reference specs; shipped material conforms to the COA for the lot
and destination regulation. HS classification typically 3402
(indicative). Avoid prolonged cold storage to prevent haze/gel;
warm and mix to restore clarity.
| Parameter | Typical | Spec |
|---|---|---|
| Active matter (a.i.) | 29–31% | ≥ 30% (per COA) |
| Free amine | ≤ 0.2% | ≤ 0.5% |
| Color (APHA) | ≤ 50 | ≤ 80 |
| pH (as supplied) | 6.0–8.5 | 6.0–9.0 |
| Appearance | Clear to pale yellow liquid | — |
| Viscosity (25 °C) | flowable | informational |
| Use cases | Dishwash, hard‑surface, degreasers | — |
| Parameter | Typical | Spec |
|---|---|---|
| Active matter (a.i.) | ~35% | as ordered |
| Free amine | ≤ 0.2% | ≤ 0.5% |
| Color (APHA) | ≤ 60 | ≤ 100 |
| pH (as supplied) | 6.0–8.5 | 6.0–9.0 |
| Viscosity (25 °C) | higher than 30% | as ordered |
| Use cases | Concentrated HI&I formulations | — |
| Applications | Packaging | Storage & Handling |
|---|---|---|
|
• High‑foam degreasers, manual dishwash,
hard‑surface/vehicle cleaners.
• Bleach‑stable cleaners (NaOCl), alkaline cleaners, and peroxide systems. • Secondary surfactant for viscosity build with SLES/ALS and NaCl. |
• 200 kg HDPE drums • 900–1000 kg IBC.
• Small packs for R&D on request. |
• Non‑DG. Store 15–35 °C. Protect from freezing and
excessive heat.
• Avoid strong oxidizers/acids. Use PPE; prevent eye/skin contact. Mix before use. |
Specs are representative; shipped material conforms to the COA for
the lot. Local registrations/labeling apply—confirm per market and
application.